Delivering High Quality Pipes & Tubes in API 5L, ASTM A335, A691, A213, A358, A312, A671, SA179, SA192, SA210, A333, SA334, B463, B444 etc.
Vimek Industries Logo, Socket weld Fittings Manufacturer and Supplier

ASTM A106 GRADE C CARBON STEEL SEAMLESS PIPES

Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Servicee

ASTM A106 GRADE C CARBON STEEL SEAMLESS PIPES

ASTM A106 Grade C Pipes, ASTM A106 Gr. C Pipe, ASTM A106 Grade C Seamless Pipes, ASTM A106 Grade C Carbon Steel Seamless Pipes, A106 Grade C Carbon Steel Pipe.

ASTM A106 Grade C Carbon Steel Seamless Pipes Certified and Tested in accordance with ISO 3183, ISO 15156, NACE MRO175 / 103, HIC, SWC, SSC, SSCC, SOUR SERVICE, H2S, IMPACT, Post Weld Heat Treatment (PWHT), IBR, High yield, IPS-M-PI-190, IPS-M-PI-221 etc.

Vimek Industries, we carry a full inventory of A106 Grade C Pipe roducts in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. A106 Grade C Carbon Steel Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.

We Supply A106 Grade C Carbon Steel Seamless Pipes in ASTM A106 Grade B, ASTM A106 Grade C, ASTM A53 Grade B, ASTM A333 Grade 3, ASTM A333 Grade 6, ASTM A334 Grade 1, ASTM A334 Grade 6, ASTM A179, ASTM A192, ASTM A210 A1, ASTM A210 C.The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.

Vimek Industries specializes in A106 GRade C Carbon Steel Pipes with years of Experience in Manufacturing A106 Grade C Pipe. we offer high quality, lower cost but the best service. As a result to that our A106 Grade C Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

ASTM A106 GR. B Carbon Steel Seamless Pipes and Tubes, ASTM A53 GR. B Carbon Steel Seamless Pipes and Tubes, ASTM A333 GR. 3 Carbon Steel Seamless Pipes and Tubes, A333 GR. 6 Carbon Steel Seamless Pipes and Tubes, ASTM A334 GR.1 Carbon Steel Seamless Pipes and Tubes, ASTM A334 GR.6 Carbon Steel Seamless Pipes and Tubes, ASTM A179 Carbon Steel Seamless Pipes and Tubes, ASTM A192 Carbon Steel Seamless Pipes and Tubes, ASTM A210 GR.A1 Carbon Steel Seamless Pipes and Tubes, ASTM A210 GR.C


A106 Grade C carbon steel seamless Pipes range

A106 Grade C Seamless Pipes Specification
ASTM A106 / ASTM A53 / ASTM A333 / ASTM A334 / ASTM A179 / ASTM A192 / ASTM A210
A106 Grade C Seamless Pipes Grades
ASTM A106 GRADE B, ASTM A106 GRADE C, ASTM A53 GRADE B, ASTM A333 GRADE 1, ASTM A333 GRADE 6, ASTM A333 GRADE A334 GRADE 1, ASTM A334 GRADE 6, ASTM A179, ASTM A192, ASTM A210
A106 Grade C Seamless Pipes Type
Seamless - Hot Rolled / Cold Drawn
A106 Grade C Seamless Pipes Outer Diameter Size
1/4" NB To 30" NB (Nominal Bore Size)
A106 Grade C Seamless Pipes Wall Thickness
Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness
A106 Grade C Seamless Pipes Length
5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
A106 Grade C Seamless Pipes Ends
Plain Ends / Beveled Ends / Coupling
A106 Grade C Seamless Pipes Delivery Conditions
As Rolled, Cold Drawn, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T
A106 Grade C Seamless Pipes Coating
Epoxy Coating / Colour Paint Coating / 3LPE Coating.
A106 Grade C Seamless Pipes Other Testing
NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT etc.
A106 Grade C Seamless Pipes Dimension
All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API.
A106 Grade C Seamless Pipes Value Added Services
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
A106 Grade C Seamless Pipes Packaging
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
A106 Grade C Seamless Pipes Shipment & Transportation
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
A106 Grade C Seamless Pipes Material Test Certificate
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

ASTM A106 grade C seamless pipes

Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service


ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. Federal Steel Supply is a world leader in the supply of A106 / SA 106 pipe and stocks a full range of grades B/C in a size rage of NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification*. Pipe ordered under this specification shall be suitable for bending, for flanging, for welding, and for similar forming operations. A full range of A106 stock is available in Schedules 10 through 160, STD, XS, XXS. Unscheduled wall thicknesses available up to 4 inches.

Vimek Industries stocks a full range of A106 seamless carbon steel pipe.

A106 PIPE SPECIFICATIONS
A/SA106
NPS 1/4″- 30″
Schedules 10 through 160, STD, XH and XXH


Scope
ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.
NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.

Process

Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.
Steel cast in ingots or strand cast is permissible.
Hot-finished pipe need not be heat treated.
Cold-drawn pipe shall be heat treated after the final cold draw pass.

Chemical Requirements FOR ASTM A106 grade C seamless pipes

Grade A Grade B Grade C
Carbon max. % 0.25 0.30 0.35
*Manganese % 0.27 to 0.93 *0.29 to 1.06 0.29 to 1.06
Phosphorous, max. % 0.035 0.035 0.035
Sulfur, max. % 0.035 0.035 0.035
Silicon, min.% 0.10 0.10 0.10
Chrome, max. % 0.40 0.40 0.40
Copper, max. % 0.40 0.40 0.40
Molybdenum, max. % 0.15 0.15 0.15
Nickel, max. % 0.40 0.40 0.40
Vanadium, max.% 0.08 0.08 0.08

Total of Cr, Cu, Mo, Ni, and V shall not exceed 1%

Permissible Variations in Wall Thickness for ASTM A106 grade C pipes
The minimum wall thickness at any point shall not be more than 12.5% under the nominal wall thickness specified.

Permissible Variations in Weights per Foot for ASTM A106 grade C pipes
Weight of any length shall not vary more than 10% over and 3.5% under that specified. NOTE — NPS 4 and smaller — weighed in lots. Larger sizes shall be weighed separately by length.

Permissible Variations in Outside Diameter for ASTM A106 grade C pipes
Outside Diameter at any point shall not vary from standard specified more than:

NPS [DN Designator] Over Under
in. mm in. mm
1/8 to 1-1/2 [6 to 40], incl 1/64 (0.015) 0.4 1/64 (0.015) 0.4
Over 1-1/2 to 4 [40 to 100], incl 1/32 (0.031) 0.8 1/32 (0.031) 0.8
Over 4 to 8 [100 to 200], incl 1/16 (0.062) 1.6 1/32 (0.031) 0.8
Over 8 to 18 [200 to 450], incl 3/32 (0.093) 2.4 1/32 (0.031) 0.8
Over 18 to 26 [450 to 650], incl 1/8 (0.125) 3.2 1/32 (0.031) 0.8
Over 26 to 34 [650 to 859], incl 5/32 (0.156) 4.0 1/32 (0.031) 0.8
Over 34 to 48 [850 to 1200], incl 3/16 (0.187) 4.8 1/32 (0.031) 0.8

Tensile Requirements for ASTM A106 grade C pipes

Seamless
Grade A Grade B Grade C
Tensile Strength, min., psi 48,000 60,000 70,000
Yield Strength, min., psi 30,000 35,000 40,000

Number of Tests Required for ASTM A106 grade C pipes

NPS On One Length from Each Lot of
Tensile 5 and smaller 400 or less
6 and larger 200 or less
Bending 2 and smaller 400 or less
Flattening 2 through 5 400 or less
6 and over 200 or less

Hydrostatic Testing for ASTM A106 grade C pipes
Inspection test pressures produce a stress in the pipe wall equal to 60% of specified minimum yield strength (SMYS) at room temperature. Maximum Pressures are not to exceed 2500 psi for NPS3 and must stay under 2800 psi for the larger sizes. Pressure is maintained for not less than 5 seconds.

Mechanical Tests Specified for ASTM A106 grade C pipes
Tensile Test — NPS 8 and larger — either transverse or longitudinal acceptable Smaller than NPS 8 — weighed in lots. Larger sizes — by length. Flattening Test — NPS 2-1/2 and larger. Bending Test (Cold) — NPS 2 and under.

Degree of Bend Diameter of Mandrel
For Normal A106 Uses 90 12 x nom dia. of pipe
For Close Coiling 180 8 x nom dia. of pipe

Lengths for ASTM A106 grade C pipes
Lengths required shall be specified on order. No “jointers” permitted unless otherwise specified. If no definite lengths required, following practice applies: Single Random — 17′ ~ 24′ lengths Double Random — 36′ ~ 44′ lengths

Required Markings on Each Length for ASTM A106 grade C pipes
(On Tags attached to each Bundle in case of Bundled Pipe) Rolled, Stamped, or Stenciled (Mfrs. Option) Manufacturer’s name or brand. Length of pipe. A106 A, A 106 B, A 106 C. ANSI schedule number. Hydrostatic test pressures and/or NDE; Weight per foot (NPS 4 and larger) or NH if neither is specified. Additional “S” if tested supplementary requirements.

Referenced Documents for ASTM A106 grade C seamless pipes

  • ASTM A 530/A 530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
  • ASTM E 213 Practice for Ultrasonic Examination of Metal Pipe and Tubing
  • ASTM E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
  • ASTM E 381 Method of Macroetch testing Steel Bars, Billets, Blooms, and Forgings
  • ASTM E 570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
  • ASME SB36.10M Welded and Seamless Wrought Steel Pipe


General Information

Orders for material under this specification should include the following, as required, to describe the desired material adequately:

Quantity Feet, centimeters, or number of lengths
Name of material Seamless or Welded Pipe
Grade Grade A, Grade B, or Grade C
Manufacture ot-finished or cold-drawn
Size NPS or Outside Diameter and Schedule Number of Average Wall Thickness
Special outside diameter tolerance pipe
Inside diameter tolerance pipe, over 10 in ID
Length Specific or random
Supplementary requirements
Test Report Required
Specification designation
Hydrostatic test
Special requirements

A106 GRADE C PIPES PRICE

Country Name Latest Price/ Recent Updated Price 2017-18
A106 GRADE C Pipe Price in Indonesia US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in Malaysia US $850  -  990  / Metric Ton
A106 GRADE C Pipe Price in United Arab Emirates AED 3121.84 - 3489.11/ Metric Ton
A106 GRADE C Pipe Price in Singapore US $850  -  995  / Metric Ton
A106 GRADE C Pipe Price in Iran US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in South Korea US $850  -  1350  / Metric Ton
A106 GRADE C Pipe Price in Egypt US $850  -  1150  / Metric Ton
A106 GRADE C Pipe Price in Saudi Arabia US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in Kuwait US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in South Africa US $850  -  1100  / Metric Ton
A106 GRADE C Pipe Price in Qatar US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in Bahrain BD 320-358 / Metric Ton
A106 GRADE C Pipe Price in Oman US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in India INR 56988-63692/ Metric Ton
A106 GRADE C Pipe Price in Taiwan US $850  -  950  / Metric Ton
A106 GRADE C Pipe Price in Vietnam US $850  -  1250  / Metric Ton
A106 GRADE C Pipe Price in USA US $850  -  1050  / Metric Ton

*ASTM A 106 grade B Seamless Pressure Pipe

B) Unless otherwise specified by the purchaser, for each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the specified maximum will be permitted up to a maximum of 1.65 %.

*ASME SA 106 grade B Seamless Pressure Pipe

B) For each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the specified maximum will be permitted up to a maximum of 1.35 %.


ASTM A106 grade C Carbon Steel Seamless PipeS Sizes Available in Stock with Price












SUPPLYING ASTM A106 Grade C CARBON STEEL SEAMLESS PIPES TO COUNTRIES -

We Export ASTM A106 Gr.C Pipe

to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Vimek Industries is a well known worldwide Exporter of ASTM A106 Grade C Pipes, Vimek Industries is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM A106 Grade C Pipe in India and Overseas, offering a wide range of ASTM A106 Grade C Pipes



Supplying Countries & Cities

UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

Vimek Industries

4th Floor, Platina, G Block,
Bandra Kurla Complex,
Mumbai - 400051. Maharashtra. INDIA


Tel:


Email: sales@vimekindustries.com

Web: www.vimekindustries.com


ISO 9001
ISO 14001
OHSAS 18001
PED-97/23/EC