Delivering High Quality Pipes & Tubes in API 5L, ASTM A335, A691, A213, A358, A312, A671, SA179, SA192, SA210, A333, SA334, B463, B444 etc.
Vimek Industries Logo, Socket weld Fittings Manufacturer and Supplier

ASTM A333 Grade 6 CARBON STEEL SEAMLESS PIPES

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

ASTM A333 GRADE 6 CARBON STEEL SEAMLESS PIPES

ASTM A333 Grade 6 Pipes, ASTM A333 Grade 6 Carbon Steel Pipes, ASTM A333 Grade 6 Seamless Pipes, ASTM A333 Grade 6 Carbon Steel Seamless Pipes, A333 Grade 6 Low Temperature Service Pipes.

ASTM A333 Grade 6 Carbon Steel Seamless Pipes Certified and Tested in accordance with ISO 3183, ISO 15156, NACE MRO175 / 103, HIC, SWC, SSC, SSCC, SOUR SERVICE, H2S, IMPACT, Post Weld Heat Treatment (PWHT), IBR, High yield, IPS-M-PI-190, IPS-M-PI-221 etc.

Vimek Industries, we carry a full inventory of A333 Grade 6 Pipe products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. A333 Grade 6 Carbon Steel Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.

We Supply A333 Grade 6 Carbon Steel Seamless Pipes in ASTM A106 Grade B, ASTM A106 Grade C, ASTM A53 Grade B, ASTM A333 Grade 3, ASTM A333 Grade 6, ASTM A334 Grade 1, ASTM A334 Grade 6, ASTM A179, ASTM A192, ASTM A210 A1, ASTM A210 C.The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.

Vimek Industries specializes in A333 Grade 6 Carbon Steel Pipes with years of Experience in Manufacturing A333 Grade 6 Pipe. we offer high quality, lower cost but the best service. As a result to that our A333 Grade 6 Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

ASTM A106 GR. B Carbon Steel Seamless Pipes and Tubes, ASTM A53 GR. B Carbon Steel Seamless Pipes and Tubes, ASTM A333 GR. 3 Carbon Steel Seamless Pipes and Tubes, A333 GR. 6 Carbon Steel Seamless Pipes and Tubes, ASTM A334 GR.1 Carbon Steel Seamless Pipes and Tubes, ASTM A334 GR.6 Carbon Steel Seamless Pipes and Tubes, ASTM A179 Carbon Steel Seamless Pipes and Tubes, ASTM A192 Carbon Steel Seamless Pipes and Tubes, ASTM A210 GR.A1 Carbon Steel Seamless Pipes and Tubes, ASTM A210 GR.C


A333 Grade 6 carbon steel seamless Pipes range

A333 Grade 6 Seamless Pipes Specification
ASTM A106 / ASTM A53 / ASTM A333 / ASTM A334 / ASTM A179 / ASTM A192 / ASTM A210
A333 Grade 6 Seamless Pipes Grades
ASTM A106 GRADE B, ASTM A106 GRADE C, ASTM A53 GRADE B, ASTM A333 GRADE 1, ASTM A333 GRADE 6, ASTM A333 GRADE A334 GRADE 1, ASTM A334 GRADE 6, ASTM A179, ASTM A192, ASTM A210
A333 Grade 6 Seamless Pipes Type
Seamless - Hot Rolled / Cold Drawn
A333 Grade 6 Seamless Pipes Outer Diameter Size
1/4" NB To 30" NB (Nominal Bore Size)
A333 Grade 6 Seamless Pipes Wall Thickness
Schedule 20 To Schedule XXS (Heavier On Request) Up to 250 mm Thickness
A333 Grade 6 Seamless Pipes Length
5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
A333 Grade 6 Seamless Pipes Ends
Plain Ends / Beveled Ends / Coupling
A333 Grade 6 Seamless Pipes Delivery Conditions
As Rolled, Cold Drawn, Normalizing Rolled, Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T
A333 Grade 6 Seamless Pipes Coating
Epoxy Coating / Colour Paint Coating / 3LPE Coating.
A333 Grade 6 Seamless Pipes Other Testing
NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT etc.
A333 Grade 6 Seamless Pipes Dimension
All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API.
A333 Grade 6 Seamless Pipes Value Added Services
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
A333 Grade 6 Seamless Pipes Packaging
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
A333 Grade 6 Seamless Pipes Shipment & Transportation
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
A333 Grade 6 Seamless Pipes Material Test Certificate
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

ASTM A333 Grade 6 seamless pipes

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness


ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11. Discussed herein are Grades 1, 3 and 6.

Vimek Industries stocks a full range of A333 Grade 6 seamless carbon steel pipe.

A333 PIPE SPECIFICATIONS
A/SA 333
NPS 1/4″- 30″
Schedules 10 through 160, STD, XH and XXH


Scope
ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

Materials and Manufacture for A333 Grade 6 Seamless Pipes The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. Heat Treatment Requirements for A333 Grade 6 Seamless Pipes
All seamless and welded pipe shall be treated to control their microstructure by the following methods: Normalizing per A 333/A 333M-05 section 4.2.1.1; section 4.2.1.2 or section 4.2.1.3 Quenched and Tempered per A 333/A 333M – 05 section 4.2.2.1 Double Normalized and Tempered per A 333/A 333M – 05 section 4.2.2.2

Chemical Requirements For ASTM A333 Grade 6 seamless pipes

Composition, %
Element Grade 1 Grade 6 Grade 6
Carbon, max 0.30 0.19 0.30
Manganese 0.40 – 1.06 0.31 – 0.64 0.29 – 1.06
Phosphorous, max 0.025 0.025 0.025
Sulfur, max 0.025 0.025 0.025
Silicon 0.18 -0.37 0.10 min
Nickel 3.18 – 3.82

For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese. When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted.

Tensile Requirements FOR ASTM A333 Grade 6 seamless pipes

The material shall conform to the requirements as proscribed:

Grade 1 Grade 6 Grade 6
psi MPa psi MPa psi MPa
Tensile Strength, min 55,000 380 65,000 450 60,000 415
Yield Strength, min 30,000 205 35,000 240 35,000 240
Longitudinal Transverse Longitudinal Transverse Longitudinal Transverse
Elongation in 2 in. or 50 mm, (or 4D), min, %:
Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section 35 35 30 20 30 16.5
When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used 28 20 22 14 22 12
For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage 1.75 1.25 1.50 1.00 1.50 1.00
Elongation in 2 in. or 50 mm, min, %:

Impact Requirements FOR ASTM A333 Grade 6 seamless pipes

For Grades 1, 3 and 6, the notched-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe with wall thicknesses of 0.120 in. [3 mm] and larger, shall not be less than the values prescribed:

Size of Specimen, min Minimum Average Notched Bar Impact Value of Each Set of Three Specimens Minimum Notched Bar Impact Value of One Specimen Only of a Set Impact Temperature
ft-lbf J ft-lbf J Grade Min Impact
Test Temp
10 by 10 13 18 10 14 F C
10 by 7.5 10 14 8 11 1 -50 -45
10 by 6.67 9 12 7 9 3 -150 -100
10 by 5 7 9 5 7 6 -50 -45
10 by 3.33 5 7 3 4
10 by 2.5 4 5 3 4

Mechanical Testing FOR ASTM A333 Grade 6 seamless pipes
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe. Hydrostatic Test Impact Test One notched bar impact test, consisting of breaking three specimens shall be made from each heat represtented in a heat-treatment load on specimens taken from the finished pipe.

Lengths FOR ASTM A333 Grade 6 seamless pipes
Lengths required shall be specified on order. If no definite lengths required, following practice applies: Single Random — 17′ ~ 24′ lengths Double Random — 36′ ~ 44′ lengths
Required Markings on Each Length FOR ASTM A333 Grade 6 seamless pipes
(On Tags attached to each Bundle in case of Bundled Pipe) Markings will adhere to prescribed specifications in A 999/A999M and be: Rolled, Stamped, or Stenciled (Mfrs. Option) In addition, markings will include:

ot Finished or Cold Drawn Manufacture Name
Specification / Grade ydro or NDE
Seamless or Welded
Schedule Number
the letters “LT” followed by the temperature at which the impact tests were made * and **
the letters “QT” when the pipe is furnished in the quenched and tempered condition

* except when a lower test temperature is required because of reduced specimen size, in which case, the higher impact test temperature applicable to a full size specimen would be marked ** when the size of the finished pipe is insufficient to obtain subsize impact specimens, the marking shall not include the letters “LT” followed by an indicated test temperature unless Supplementary Requirement S! is specified.

Referenced Documents FOR ASTM A333 Grade 6 seamless pipes

  • ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
  • ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe
  • ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
  • ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials


Order Information FOR ASTM A333 Grade 6 seamless pipes

Orders for material under this specification should include the following, as required, to describe the desired material adequately:

Quantity Feet, centimeters, or number of lengths
Name of material Seamless or Welded Pipe
Grade Grade 1, Grade 6, or Grade 6
Size NPS or Outside Diameter and Schedule Number of Average Wall Thickness
Length Specific or Random
End Finish
Optional Requirements
eat Analysis Requirement
Stress Relieving
Repair by Welding
Other Temperatures for Impact Test
ydrostatic Test or Nondestructive Electric Test
Test Report Required
Specification Designation and
Special Requirements or Exceptions to this Specification

A333 GRADE 6 PIPES PRICE

Country Name Latest Price/ Recent Updated Price 2017-18
A333 GRADE 6 Pipe Price in Indonesia US $1350  -  1550  / Metric Ton
A333 GRADE 6 Pipe Price in Malaysia US $1350  -  1550  / Metric Ton
A333 GRADE 6 Pipe Price in United Arab Emirates AED 3421.84 - 3889.11/ Metric Ton
A333 GRADE 6 Pipe Price in Singapore US $1100  -  1450  / Metric Ton
A333 GRADE 6 Pipe Price in Iran US $1200  -  1800  / Metric Ton
A333 GRADE 6 Pipe Price in South Korea US $1150  -  1350  / Metric Ton
A333 GRADE 6 Pipe Price in Egypt US $1250  -  1650  / Metric Ton
A333 GRADE 6 Pipe Price in Saudi Arabia US $1250  -  1850  / Metric Ton
A333 GRADE 6 Pipe Price in Kuwait US $1400  -  1950  / Metric Ton
A333 GRADE 6 Pipe Price in South Africa US $1200  -  1600  / Metric Ton
A333 GRADE 6 Pipe Price in Qatar US $1150  -  1950  / Metric Ton
A333 GRADE 6 Pipe Price in Bahrain BD 320-358 / Metric Ton
A333 GRADE 6 Pipe Price in Oman US $1120  -  1850  / Metric Ton
A333 GRADE 6 Pipe Price in India INR 115988-200692/ Metric Ton
A333 GRADE 6 Pipe Price in Taiwan US $1170  -  1975  / Metric Ton
A333 GRADE 6 Pipe Price in Vietnam US $1275  -  1840  / Metric Ton
A333 GRADE 6 Pipe Price in USA US $1510  -  2400  / Metric Ton
S1. Subsize Impact Specimens
S1.1 When the size of the finished pipe is insufficient to permit obtaining subsize impact specimens, testing shall be a matter of agreement between the manufacturer and the purchaser.

S2. Requirements for Pipe for Hydrofluoric Acid Alkylation Service

S2.1 Pipe shall be provided in the normalized heat-treated condition.

S2.2 The carbon equivalent (CE), based on heat analysis,shall not exceed 0.43 % if the specified wall thickness is equalto or less than 1 in. [25.4 mm] or 0.45 % if the specified wall thickness is greater than 1 in. [25.4 mm].

S2.3 The carbon equivalent shall be determined


WE MAINLY STOCK & SUPPLY THE ASTM A333 Grade 6 CARBON STEEL SEAMLESS PIPES OF FOLLOWING MAKE:


ASTM Astm a333 Grade 6 Carbon Steel Seamless PipeS Sizes Available in Stock with Price


SUPPLYING ASTM A333 Grade 6 CARBON STEEL SEAMLESS PIPES TO COUNTRIES -

We Export ASTM A333 Grade 6 Pipe to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Vimek Industries is a well known worldwide Exporter of ASTM A333 Grade 6 Pipe, Vimek Industries is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM A333 Grade 6 Pipe in India and Overseas, offering a wide range of ASTM A333 Grade 6 Pipe Pipes



Supplying Countries & Cities

UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

Vimek Industries

4th Floor, Platina, G Block,
Bandra Kurla Complex,
Mumbai - 400051. Maharashtra. INDIA


Tel:


Email: sales@vimekindustries.com

Web: www.vimekindustries.com


ISO 9001
ISO 14001
OHSAS 18001
PED-97/23/EC