Delivering High Quality Pipes & Tubes in API 5L, ASTM A335, A691, A213, A358, A312, A671, SA179, SA192, SA210, A333, SA334, B463, B444 etc.
Vimek Industries Logo, Socket weld Fittings Manufacturer and Supplier

INCONEL 600 / 601 / 625 / ALLOY 600 / 601 / 625 PIPES AND TUBES

Inconel is a family of austenitic nickel-chromium-based superalloys. Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat.

INCONEL® 600 / 601 / 625 / ALLOY 600 / 601 / 625 PIPES AND TUBES

Inconel Pipes and Tubes, Inconel 600 Pipes and Tubes, Inconel 601 Pipes and Tubes, Inconel 625 Pipes and Tubes, Nickel Alloy 600, 601, 625 Pipes and Tubes, UNS NO6600, UNS NO6601, UNS NO6025

Inconel 600, 601, 625 Pipes and Tubes Certified and Tested in accordance with NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc.

( UNS NO6600 / UNS N06601 / UNS N06625)

Vimek Industries, we carry a full inventory of Inconel 600 / 601 / 625 Pipes and Tube and Supply Alloy 600 / 601 / 625 Pipes and Tube products is a a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.

We Supply INCONEL Pipes and Tubes in ASTM B163, ASTM B167, ASTM B444, ASTM B829,The grade indicates the testing methods required for a given application.

Vimek Industries specializes in Inconel 600 / 601 / 625 Pipes and Tube with years of Experience in Manufacturing UNS N06600 / UNS NO6601 / UNS NO6025 Pipes and Tube. we offer high quality, lower cost but the best service. As a result to that our Inconel 600 / 601 / 625 Pipes and Tubes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.

 inconel 600 pipe, inconel 601 pipe, inconel 625 pipe, inconel 600 tube, inconel 601 tube, inconel 625 tubes, astm b163, astm b167, astm b829, astm b444, uns no6600, uns no6601, uns no6625, asme sb163 , asme sb444
Inconel 600 / 601 / 625 /

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.

These Inconel alloys or superalloys are nickel-based alloys that exhibit traits such as high resistance to corrosion, oxidation, carburization, pitting, crevice, corrosion cracking, and high temperature strength. Often, Inconel is referred to as “Inco”.

Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Inconel® brand alloys.

The corrosion-resistant superalloys are widely used in extreme environments where tremendous heat and corrosion resistance is paramount to the integrity of the end product. Chemical processing, nuclear, petrochemical, aerospace and marine industries widely use these superalloys.

INCONEL® is a registered trademark of the Special Metals Corporation.


Inconel 600 / 601 / 625 PIPEs and tubes range

Inconel 600 / 601 / 625 Pipe & Tubes Specification
ASTM B163 / ASTM B167 / ASTM B444 / ASTM B829 / ASME SB163 / ASME SB167 / ASME SB444 / ASME SB829
Inconel 600 / 601 / 625 Pipe & Tubes Grades
INCONEL 600 / INCONEL 601 / INCONEL 625 / UNS NO6600 / UNS NO6601 / UNS NO 6625
Inconel 600 / 601 / 625 Pipe & Tubes Type
Cold Drawn / Welded / ERW
Inconel 600 / 601 / 625 Pipe & Tubes Outer Diameter Size
Seamless - 1/4" NB To 6" NB (Nominal Bore Size)
Welded / ERW- 1" NB To 16" NB (Nominal Bore Size)
Inconel 600 / 601 / 625 Pipe & Tubes Wall Thickness
Schedule 10 To Schedule 160
Inconel 600 / 601 / 625 Pipe & Tubes Length
5 To 7 Meters, 09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
Inconel 600 / 601 / 625 Pipe & Tubes Pipe Ends
Plain Ends / Beveled Ends
Inconel 600 / 601 / 625 Pipe & Tubes Delivery Conditions
As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered
Inconel 600 / 601 / 625 Pipe & Tubes Coating
Electropolish, Mechanical Polish, Satin Finish, Passivated
Inconel 600 / 601 / 625 Pipe & Tubes Other Testing
NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc.
Inconel 600 / 601 / 625 Pipe & Tubes Dimension
All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM and ASME
Inconel 600 / 601 / 625 Pipe & Tubes Value Added Services
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Inconel 600 / 601 / 625 Pipe & Tubes Packaging
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Inconel 600 / 601 / 625 Pipe & Tubes Shipment & Transportation
By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Inconel 600 / 601 / 625 Pipe & Tubes Material Test Certificate
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

ASTM B163 INCONEL 600 / ASME SB163 INCONEL 600 SEAMLESS TUBES

Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

This specification covers seamless tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service.

(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.

(B) Element shall be determined arithmetically by difference.

(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.

(B) Element shall be determined arithmetically by difference.

(C) Alloy UNS N08811: Al + Ti, 0.85 − 1.20.

This specification covers outside diameter and average wall, or outside diameter and minimum wall tube.

The sizes covered by this specification are 3 in. (76.2 mm) and under in outside diameter with minimum wall thicknesses of 0.148 in. (3.76 mm) and under, and with average wall thicknesses of 0.165 in. (4.19 mm) and under.

Tube shall be furnished in the alloys and conditions as shown in Table 2. For small diameter and light wall tube (converter sizes), see Appendix X2.

(A) Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, UNS N08811, and UNS N08120 are normally employed in service temperatures above 1100°F (539°C) where resistance to creep and rupture is required, and it is annealed to develop controlled grain size for optimum properties in this temperature range.

The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Keywords

Condenser Tubes - Condensers - Heat Exchanger Tubes - Heat Exchangers - Nickel - Nickel Alloys - Seamless Nickel Alloy Tubes - Seamless Pipes And Tubes

ASTM B167 INCONEL 600 / 601 / ASME SB167 INCONEL 600 / 601 SEAMLESS TUBES

Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N0625, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

1.1 This specification2 covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N0625, N06045, and N06696),3 nickel-chromium-cobalt-molybdenum alloy (UNS N06617), and nickel-iron-chromium-tungsten alloy UNS N06674), in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Keywords

Corrosive Service Applications - Heat Treatment - High-Temperature Service Applications - High-Temperature Services - Nickel-Chromium Alloys - Nickel-Chromium-Cobalt Alloys - Nickel-Iron-Chromium Alloys - Seamless Nickel Alloy Pipes - Seamless Nickel Alloy Tubes - Seamless Pipes And Tubes

ASTM B444 INCONEL 625 / ASME SB444 INCONEL 625 SEAMLESS pipes and TUBES

Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

1.1 This specification2 covers nickel-chromium-molybdenum-columbium alloys (UNS N06625 and UNS N06852) and nickel-chromium-molybdenum-silicon alloy (UNS N06219)3 in the form of cold-worked seamless pipe and tube. The general requirements for pipe and tube are covered by Specification B829.

1.1.1 UNS N06625 products are furnished in two grades of different heat-treated conditions:

1.1.1.1 Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C).

1.1.1.2 Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required.

NOTE 1: Hot-working or reannealing may change properties significantly, depending on working history and temperatures.

1.1.2 Alloys UNS N06219 and UNS N06852 are supplied in the solution annealed condition only.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Keywords

Annealing - Cold Working - Forming - Nickel-Chromium-Molybdenum Alloys - Nickel-Chromium-Molybdenum-Columbium Alloys - Nickel-Chromium-Molybdenum-Silicon Alloys - Seamless Nickel Alloy Pipes - Seamless Nickel Alloy Tubes - Seamless Pipes And Tubes.

ASTM B829 INCONEL 600 / 601 / 625 / ASME SB829 INCONEL 600 / 601 / 625 SEAMLESS pipes and TUBES

Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications:

1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.

1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.


INCONEL 600 SEAMLESS pipes and tubes Chemical Composition, UNS NO6600

The chemical composition of Inconel Alloy 600 is provided in the table below:

Ni + Co Cr Fe C Mn S Si Cu
72.0 min 14.0-17.0 6.0-10.0 .15 max 1.00 max .015 max .50 max .50 max

INCONEL 600 SEAMLESS pipes and tubes Mechanical Properties

Typical room temperature Tensile Properties of Annealed Material

Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB)
Tube & Pipe ot-Finished 75-100 25-50 35*55 -
Tube & Pipe Cold-Drawn 80-100 25-50 35-55 88 Max

INCONEL 601 SEAMLESS pipes and tubes Chemical Composition, UNS NO6601

The chemical composition of Inconel Alloy 601 is provided in the table below:

Ni Cr Al C Mn Si Fe
61.5 22.5 1.4 .05 .3 .2 14

INCONEL 600 SEAMLESS pipes and tubes Mechanical Properties

Typical room temperature Tensile Properties of Annealed Material

Tensile (psi) .2% Yield (psi) Elongation (%)
80,000 30,000 35

INCONEL 625 SEAMLESS pipes and tubes Chemical Composition, UNS NO6025

The chemical composition of Inconel Alloy 625 is provided in the table below:

Element Percentage
Carbon 0.010 max
Manganese 0.50 max
Phosphorus 0.015 max
Sulfur 0.015 max
Silicon 0.50 max
Chromium 20.00 - 23.00
Nickel Balance
Molybdenum 8.00 - 10.00
Iron 5.00 max
Titanium 0.40 max
Aluminum 0.40 max
Tantalum 0.05 max

INCONEL 625 SEAMLESS pipes and tubes Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material

Representative Tensile Properties, bar, 1800° F anneal

Temp° F Tensile (psi) .2% Yield (psi) Elongation in 2 “ (%)
70 144,000 84,000 44
400 134,000 66,000 45
600 132,000 63,000 42.5
800 131,500 61,000 45
1000 130,000 60,500 48
1200 119,000 60,000 34
1400 78,000 58,500 59
1600 40,000 39,000 117

INCONEL 600 / 601 / 625 seamless pipes and TUBES APPLICATIONS

The Inconel Alloy 600 / 601 / 625 Pipes and Tubes is used in the following applications:-

  • Aircraft ducting systems
  • Aerospace
  • Jet engine exhaust systems
  • Engine thrust-reverser systems
  • Specialized seawater equipment
  • Chemical process equipment
  • Chemical Processing
  • Heat treating industry
  • Power generation
  • Heat treating muffles and retorts
  • Radiant tubes
  • Catalyst support grids in nitric acid production
  • Steam superheater tube supports
  • Pulp and paper industry
  • Food processing
  • Nuclear Engineering
  • Gas turbine components


INCONEL 600 / 601 / 625 SEAMLESS PIPES AND TUBES Sizes Available in Stock with Price


Available Grade of Inconel® 600 / 601 / 625 ALLOY PIPES AND TUBES in Ready Stock -


SUPPLYING INCONEL 600 / 601 / 625 SEAMLESS Pipe & tubes TO COUNTRIES -

We Export Inconel 600 / 601 / 625 Pipes and Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Vimek Industries is a well known worldwide Exporter of Inconel 600 / 601 / 625 Pipes and Tubes, Vimek Industries is committed to provide each and every customer with the highest standard of customer service. We deals in Inconel 600 / 601 / 625 Seamless Pipes and Tube in India and Overseas, offering a wide range of Inconel 600 / 601 / 625 Pipes and Tubes



Supplying Countries & Cities

UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

Vimek Industries

4th Floor, Platina, G Block,
Bandra Kurla Complex,
Mumbai - 400051. Maharashtra. INDIA


Tel:


Email: sales@vimekindustries.com

Web: www.vimekindustries.com


ISO 9001
ISO 14001
OHSAS 18001
PED-97/23/EC