Delivering High Quality Stainless Steel Sheet, Plate & Coils in ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L etc.
Vimek Industries Logo, Stainless Steel Plates, Sheets, Coils Supplier

310s STAINLESS STEEL PLATES

A Multi-Purpose Austenitic Heat Resistant Stainless Steel with Oxidation Resistance Under Mildly Cyclic Conditions to 2010°F (1100°C). (UNS S31000 / UNS S31008)

310s Stainless Steel Plate, SS 310s Plate, 310s Steel Plate, Hot Rolled 310s Steel Plate, Cold Rolled 310s Steel Plate, 310s HR Plate, 310s CR Plate, ASTM A240 Type 310s Plate, UNS S31000 Plate, UNS S31008 Plate, BIS Approved

310s Stainless Steel Plates in Hot Rolled and Cold Rolled with Surface Finish Like Mill Finish, No.1, 2B, 2D, No.4, No.8, Mirror, Brush, Hairline etc. with NACE MR O1-75, Intergranular Corrosion Test A262 Practice E, Mercury Free in Width of 1250 / 1500 / 2000 mm and Custom Size from 0.6 to 80 mm Thickness.

310s Stainless Steel Plates - Content

310s Stainless Steel Plates Definition

Grade 310 Stainless Steel, combining excellent high temperature properties with good ductility and weldability, is designed for high temperature service. It resists oxidation in continuous service at temperatures up to 1150°C provided reducing sulphur gases are not present. It is also used for intermittent service at temperatures up to 1040°C.

Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in a temperature range lower than that which is normally considered "high temperature" service. The lower carbon content of 310S does reduce its high temperature strength compared to 310.

Like other austenitic grades these have excellent toughness, even down to cryogenic temperatures, although other grades are normally used in this environment.

Grade 310L (and proprietary versions of this grade), is a 0.03% maximum carbon version of 310, sometimes used for very specific corrosive environments, such as urea production.


Vimek Industries, are recognized as the prominent Manufacturer, Trader and Supplier of a broad assortment of 310s Stainless Steel Plates. The offered steel plate is designed with utmost precision in conformity with the international quality standards.


An ISO 9001:2008 Certified Company, Vimek Industries Inc., is a leading Stockholder, Supplier and Exporter of ASTM A240 310s Stainless Steel Plate. 310s Stainless Steel Plates are cut to your specifications and supplied with complete set of mill test reports. Custom length and width up to 2000 mm can be made available. Exports is Our Specialty! and we can source many hard to replace grades and or non-standards sizes to meet the special requirements of our customers. All ASTM SS 310s Steel Plate can be cut to size with the help of our extensive expertise in processing steel Plate products.


Our stock of ASTM A240 310s Stainless Steel Plate includes thickness of 0.6mm up to 80mm with width of 1250mm, 1500mm, 2000mm.


  • Order Large or Small Quantity of ASTM A240 304 Stainless Steel Plate
  • Cut to Size ASTM A240 310s Stainless Steel Plate Available
  • No Minimum Order Quantity for ASTM A240 310s Stainless Steel Plate
  •  

    310s Stainless Steel Plate| 310s Steel Plate| 310s SS Plate| 310s HR Plate| 310s CR Plate| 310s Stainless Steel Plate Stockholder| 310s Plate Manufacturer| ASTM A240 Type 310s

    310/310s Stainless Steel Plate Range

    310/310s Stainless Steel Plate Specification ASTM A240 / ASME SA240
    310/310s Stainless Steel Manufacturing Process Hot Rolled (HR) / Cold Rolled (CR)
    310/310s Stainless Steel Plate Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc.
    UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904
    EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
    310/310s Stainless Steel Plate Thickness 0.6 MM TO 80 MM THICKNESS
    310/310s Stainless Steel Plate Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
    310/310s Stainless Steel Plate Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
    310/310s Stainless Steel Plate Surface Finish 2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
    310/310s Stainless Steel Plate Coating PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
    310/310s Stainless Steel Plate Other Testing NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
    310/310s Stainless Steel Plate Value Added Services Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Sheet Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
    310/310s Stainless Steel Plate Packaging Loose / Carrate / Wooden Pallet / Wooden Box / Plastic Cloth Wraps
    310/310s Stainless Steel Plate Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
    310/310s Stainless Steel Plate Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

    310/310s Stainless Steel Plate Chemical Compostion and Properties

    The chemical composition of grade 310/310s Stainless Steel is outlined in the following table

    Grade C Mn Si P S Cr Mo Ni N
    310 min.
    max.
    -
    0.25
    -
    2.00
    -
    1.50
    -
    0.045
    -
    0.030
    24.0
    26.0
    - 19.0
    22.0
    -
    310S min.
    max.
    -
    0.08
    -
    2.00
    -
    1.50
    -
    0.045
    -
    0.030
    24.0
    26.0
    - 19.0
    22.0
    -

    310s Stainless Steel Plate Mechanical and Physical Properties

    The mechanical properties of grade 310s Stainless Steel Plates are displayed in the following table.

    Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
    Rockwell B (HR B) max Brinell (HB)
    max
    310 515 205 40 95 217
    310S 515 205 40 95 217

    310s STAINLESS STEEL PLATES PHYSICAL PROPERTIES
    Physical properties of 310s grade stainless steel in the annealed condition

    Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion(μm/m/°C) Thermal Conductivity(W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nΩ.m)
    0-100°C 0-315°C 0-538°C at 100°C at 500°C
    310 / 310S 7750 200 15.9 16.2 17.0 14.2 18.7 500 720

    310s Stainless Steel Plate Available Other Grade

    Possible alternative grades to 310s grade stainless steel

    EN-standard
    Steel no. k.h.s DIN
    EN-standard
    Steel name
    SAE grade UNS
    1.4109 X65CrMo14 440A S44002
    1.4112 X90CrMoV18 440B S44003
    1.4125 X105CrMo17 440C S44004
    440F S44020
    1.4016 X6Cr17 430 S43000
    1.4408 G-X 6 CrNiMo 18-10 316 S31600
    1.4512 X6CrTi12 409 S40900
    410 S41000
    1.4310 X10CrNi18-8 301 S30100
    1.4318 X2CrNiN18-7 301LN
    1.4307 X2CrNi18-9 304L S3043
    1.4306 X2CrNi19-11 304L S30403
    1.4311 X2CrNiN18-10 304LN S30453
    1.4301 X5CrNi18-10 304 S30400
    1.4948 X6CrNi18-11 304H S30409
    1.4303 X5CrNi18-12 305 S30500
    X5CrNi30-9 312
    1.4841 X22CrNi2520 310 S31000
    1.4845 X 5 CrNi 2520 310S S31008
    1.4541 X6CrNiTi18-10 321 S32100
    1.4878 X12CrNiTi18-9 321H S32109
    1.4404 X2CrNiMo17-12-2 316L S31603
    1.4401 X5CrNiMo17-12-2 316 S31600
    1.4406 X2CrNiMoN17-12-2 316LN S31653
    1.4432 X2CrNiMo17-12-3 316L S31603
    1.4435 X2CrNiMo18-14-3 316L S31603
    1.4436 X3CrNiMo17-13-3 316 S31600
    1.4571 X6CrNiMoTi17-12-2 316Ti S31635
    1.4429 X2CrNiMoN17-13-3 316LN S31653
    1.4438 X2CrNiMo18-15-4 317L S31703
    1.4362 X2CrNi23-4 2304 S32304
    1.4462 X2CrNiMoN22-5-3 2205 S31803/S32205
    1.4501 X2CrNiMoCuWN25-7-4 J405 S32760
    1.4539 X1NiCrMoCu25-20-5 904L N08904
    1.4529 X1NiCrMoCuN25-20-7 N08926
    1.4547 X1CrNiMoCuN20-18-7 254SMO S31254 

    310s Stainless Steel Plate Price

    310s Stainless Steel Plate Manufacturer Name and Origin

    310s Stainless Steel Plate is in Ready Stock and Ready to Deliver. High Quality, Lower Cost But Best Service in Steel Plates

    310s Stainless Steel Plate Application

    • Automotive
    • Railway & Transport
    • Architecture, Building & Construction
    • Chemical & Petrochemical Industries
    • Pharmaceutical
    • Energy and Power
    • Oil and Gas Industries
    • Kitchenware and Food Processing Industries
    • Plumbing And Overhead Water Tanks

    310s Stainless Steel Plate Available Offer and Discounts

    Buy Now 310s Stainless Steel Plate at an Attactive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

    310s Stainless Steel Plate Available Thickness, Width and Length










    310s Stainless Steel Plate Packing Shipment

    310s Stainless Steel Plates is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Carrate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.

    310s Stainless Steel Plates Exported Countries

    We Export 310s Stainless Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

    310s Stainless Steel Plates Supplying in States and Cities

    We Supply 310s Stainless Steel Plate Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.


    Vimek Industries, is a well known worldwide Exporter of 310s Stainless Steel Plates, Vimek Industries, is committed to provide each and every customer with the highest standard of customer service. We deals in 310s Stainless Steel Plate in India and Overseas, offering a wide range of 310s Stainless Steel Plate



    Supplying Countries & Cities

    UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

    Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

    Vimek Industries

    4th Floor, Platina, G Block,
    Bandra Kurla Complex,
    Mumbai - 400051. Maharashtra. INDIA


    Tel:


    Email: sales@vimekindustries.com

    Web: www.vimekindustries.com


    ISO 9001
    ISO 14001
    OHSAS 18001
    PED-97/23/EC