Delivering High Quality Stainless Steel Sheet, Plate & Coils in ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L etc.
Vimek Industries Logo, Stainless Steel Plates, Sheets, Coils Supplier

Stainless Steel Chequered Plates

Chequered Plate, also known as Checker Plate, Diamond Plate, Tread Plate and Durbar Floor plate, is a type of metal stock with a regular pattern of raised diamonds or lines on one side, with the Reverse Side being Featureless.

Stainless Steel Chequered Plates - Content

Chequered Plates, Stainless Steel Chequered Plates, SS Chequered Plates, Hot Rolled Chequered Plates, HR Chequered Plate, Stainless Steel Diamond Plate, Floor Plate, Tread Plate, Checker Plate, BIS Approved in Grade 304, 304L, 316, 316L etc.

ASTM A240 Stainless Steel Plates in Hot Rolled and Cold Rolled with Pattern Diamond, Butterfly, Five Bar, Two Bar, One Bar, Rice Shape etc. in Width of 1250 / 1500 / 2000 mm and Custom Size from 1 mm to 20 mm Thickness.

Stainless Steel Chequered Plates Definition

Chequered Plate, also known as Checker Plate, Tread Plate, Diamond Plate and Durbar Floor Plate, is a type of metal stock with a regular Pattern of raised Diamonds or lines on one side, with the reverse side being featureless.

Chequered Plate is usually Steel, Stainless steel or Aluminum. Steel types are normally made by hot rolling, although modern manufacturers also make a raised and pressed diamond design.

The added Texture reduces the risk of slipping, making diamond plate a solution for stairs, catwalks, walkways, and ramps in industrial settings. Its non-skid properties mean that diamond plate is frequently used on the interior of ambulances and on the footplates of firetrucks. Additional applications include truck beds and trailer floors. Chequered plate can also be used decoratively, particularly highly polished aluminum variants. Manufactured in plastic, diamond plate is marketed as an interlocking tile system to be installed on garage floors, trailers, and exercise rooms.

Stainless Steel Chequered Plate
may be used for surface protection against damage from foot traffic or harmful chemicals. Manufactured with polymer variants, inter-locking diamond plate tile is used in areas with high surface-erosive traffic.

Stainless Steel, also known as inox steel, is a steel alloy with a minimum of 10.5 or 11% chromium content by mass.

Stainless steel Plate does not stain, corrode, or rust as easily as ordinary steel, but it is not stain-proof.

The term 'corrosion resistant steel' is used when the alloy has less than the 12% minimum of chromium, for example in the aviation industry. There are different grades and surface finishes of stainless steel, depending on where it will be used. Stainless steels have a higher resistance to oxidation (rust) and corrosion in many natural and man-made environments; however, it is important to select the correct type of stainless steel for the use. There are over 150 grades of stainless steel, of which fifteen are the most used.


Vimek Industries, are recognized as the prominent Manufacturer, Trader and Supplier of a broad assortment of Stainless Steel Plates. The offered steel plate is designed with utmost precision in conformity with the international quality standards.

An ISO 9001:2008 Certified Company, Vimek Industries,, is a leading Stockholder, Supplier and Exporter of ASTM A240 Stainless Steel Chequered Plate. Stainless Steel Plates are cut to your specifications and supplied with complete set of mill test reports. Custom length and width up to 2000 mm can be made available. Exports is Our Specialty! and we can source many hard to replace grades and or non-standards sizes to meet the special requirements of our customers. All ASTM SS Chequered Plate can be cut to size with the help of our extensive expertise in processing steel Plate products.


Our stock of Stainless Steel Chequered Plate includes thickness of 6mm up to 80mm with width of 1250mm, 1500mm, 2000mm.


  • Order Large or Small Quantity of ASTM A240 Type 304, 304L, 316, 316L Stainless Steel Chequered Plate
  • Cut to Size ASTM A240 304L and 316L Stainless Steel Chequered Plate Available
  • No Minimum Order Quantity for Stainless Steel Chequered Plate Order
  •  

    Stainless Steel Chequered Plate| Steel Chequered Plate| SS Chequered Plate| HR Chequered Plate| CR Chequered Plate| Stainless Steel Chequered Plate Stockholder| Stainless Chequered Plate Manufacturer| ASTM A240 Type 304, 304l, 316, 316l

    Stainless Steel Chequered Plate Range

    Stainless Steel Chequered Plate Specification ASTM A240 / ASME SA240
    Stainless Steel Chequered Plate Manufacturing Process Hot Rolled (HR) / Cold Rolled (CR)
    Stainless Steel Chequered Plate Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc.
    UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904
    EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
    Stainless Steel Chequered Plate Thickness 0.6 MM TO 80 MM THICKNESS
    Stainless Steel Chequered Plate Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
    Stainless Steel Chequered Plate Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
    Stainless Steel Chequered Plate Surface Finish 2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
    Stainless Steel Chequered Plate Coating PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
    Stainless Steel Chequered Plate Other Testing NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
    Stainless Steel Chequered Plate Value Added Services Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Sheet Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
    Stainless Steel Chequered Plate Packaging Loose / Carrate / Wooden Pallet / Wooden Box / Plastic Cloth Wraps
    Stainless Steel Chequered Plate Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
    Stainless Steel Chequered Plate Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

    Stainless Steel Chequered Plate Chemical Compostion and Properties

    The chemical composition of grade Stainless Steel is outlined in the following table

    Designation Chemical composition % by mass max unless stated
    UNS No SAE No AISI No / Common Name C Si Mn P S Cr Mo Ni Others
    S30400 30304 304 0.07 0.75 2.00 0.045 0.030 17.5/19.5 - 8.0/10.5 N 0.10
    S30403 30304L 304L 0.030 0.75 2.00 0.045 0.030 17.5/19.5 - 8.0/12.0 N 0.10
    S31600 30316 316 0.08 0.75 2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10 
    S31603 30316L 316L 0.030 0.75  2.00 0.045 0.030 16.0/18.0 2.00/3.00 10.0/14.0 N 0.10

    Stainless Steel Plate Mechanical and Physical Properties

    The mechanical properties of grade Stainless Steel Plates are displayed in the following table.

    S.S.
    304 304L 316 316L
    Tensile Strength 85 60 85 78
    Yield Strength 35 30 35 30
    Elongation in 2' 55 55 55 55
    Rockwell 80 76 80 76
    Brinell 150 140 150 145
             
          En58J&H  
      X5
    CrNi18.9
    X5
    CrNi18.8
    x5
    CrNiMo18.12
    X2
    CrNiMo19.1
      AUST. AUST. AUST. AUST.

    The Physical properties of grade Stainless Steel Chequered Plates are displayed in the following table.

    S.S.Grade 304 304L 316 316L
    Density 8.0 8.0 8.0 8.0
    Sp.Elec. Resist 20C micro 72 72 74 74
    Sp. Heat (0-100c) 0.5 0.5 0.5 0.5
    Ther. Conductivity 16.3 16.3 16.3 16.3
      17.3 17.3 15.9 15.9
    Mild water X X X X
    Industrial X X X X
    Marine X X X X
    Salt Water     X  
    Mild X X X X
    Oxidising X X X X
    Reducing     X X
    Abrasion Resistance Good Good Good Good
    Cold Forming Excel Good Good Good
    Weldability Excel Excel Excel Excel
    Melting Flange 1430 1510 1480 1530
    Scaling Temp 900 900 900 900

    Stainless Steel Chequered Plate Price

    Stainless Steel Chequered Plate Manufacturer Name and Origin

    Stainless Steel Chequered Plate is in Ready Stock and Ready to Deliver. High Quality, Lower Cost But Best Service in Steel Plates

    Stainless Steel Chequered Plate Application

    • Checker plater can be made from different material, so they can be used in various environment. Such as the places exposed to the chemical, heat, corrosion, dust and watering. It is usually used in the chemical workshops, wastewater treatment plants, offshore oil production platforms and so on.
    • Benefit from the anti-slip feature, the checker plate is used as the anti-slip floorings in the majority situations. Such as the workshops, running boards of car, stair treads, subways, walkways, lifting equipments, etc.
    • Because of the decorative feature, the checker plate is usually used as the decorative materials in the inner and outer architectures. Such as the ceilings, furniture, cabinets, elevators, tiles, design studios and so on.

    Stainless Steel Chequered Plate Available Offer and Discounts

    Buy Now Stainless Steel Chequered Plate at an Attactive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

    Stainless Steel Chequered Plate Available Thickness, Width and Length










    Stainless Steel Chequered Plate Packing Shipment

    Stainless Steel Chequered Plates is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Carrate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.

    Stainless Steel Chequered Plates Exported Countries

    We Export Stainless Steel Chequered Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

    Stainless Steel Chequered Plates Supplying in States and Cities

    We Supply Stainless Steel Chequered Plate Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.


    Vimek Industries, is a well known worldwide Exporter of Stainless Steel Chequered Plates, Vimek Industries, is committed to provide each and every customer with the highest standard of customer service. We deals in Stainless Steel Chequered Plate in India and Overseas, offering a wide range of Stainless Steel Chequered Plate


    Stainless Steel Chequered Plates, SS Plate, ASTM A240 Type 304, 304L, 316, 316L
    Jindal, Outokompu, Aperam, Columbus, BRG, Acroni, Acerinox, TISCO
    Most Relevant and Trusted Supplier of Stainless Steel Chequered Plates Worldwide Based in Mumbai, India. ASTM A240 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L Stainless Steel Chequered Plate

    Supplying Countries & Cities

    UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

    Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

    Vimek Industries

    4th Floor, Platina, G Block,
    Bandra Kurla Complex,
    Mumbai - 400051. Maharashtra. INDIA


    Tel:


    Email: sales@vimekindustries.com

    Web: www.vimekindustries.com


    ISO 9001
    ISO 14001
    OHSAS 18001
    PED-97/23/EC