Delivering High Quality Stainless Steel Sheet, Plate & Coils in ASTM A240 Type 304, 304L, 310s, 316, 316L, 317L, 321, 347, 904L etc.
Vimek Industries Logo, Stainless Steel Plates, Sheets, Coils Supplier

Duplex Stainless Steels has got a greater strength & corrosion resistance index than a duplex stainless steel due to the presence of additional chromium, nitrogen and molybdenum.

Super Duplex Stainless Steel Plates, Sheets and Coil - Content

Super Duplex Stainless Steel Plates, Super Duplex Stainless Steel Sheet, Super Duplex Stainless Steel Coils, UNS S32750, UNS S32760, 2507 Manufacturer and Stockholder

ASTM A240 Super Duplex Plates in Hot Rolled and Cold Rolled with Surface Finish Like Mill Finish, No.1, 2B, 2D, No.4, No.8, Mirror, Brush, Hairline etc. with NACE MR 0175/ISO 15156 Certification, Intergranular Corrosion Test A262 Practice E, Mercury Free in Width of 1250 / 1500 / 2000 mm and Custom Size from 0.6 to 80 mm Thickness.

Super Duplex Stainless Steel Plates, Sheet and Coil - UNS S32750 / UNS S32760

Super Duplex Stainless Steel Plates Definition - UNS S32750 / UNS S32760

The term “Super-Duplex Stainless Steel” was first used in the 1980’s to denote highly alloyed, high-performance Duplex steel with a pitting resistance equivalent of >40 (based on Cr% + 3.3Mo% + 16N%). With its high level of chromium, Super-Duplex steel provides outstanding resistance to acids, acid chlorides, caustic solutions and other environments in the chemical/petrochemical, pulp and paper industries, often replacing 300 series stainless steel, high nickel superaustenitic steels and nickel-based alloys.

The chemical composition based on high contents of chromium, nickel and molybdenum improves intergranular and pitting corrosion resistance. Additions of nitrogen promote structural hardening by interstitial solid solution mechanism, which raises the yield strength and ultimate strength values without impairing toughness. Moreover, the two-phase microstructure guarantees higher resistance to pitting and stress corrosion cracking in comparison with conventional stainless steels.

An ISO 9001:2008 Certified Company, Vimek Industries,, is a leading Stockholder, Supplier and Exporter of ASTM A240 Duplex Stainless Steel Plate. Super Duplex Stainless Steel Coils are cut to your specifications and supplied with complete set of mill test reports. Custom length and width up to 2000 mm can be made available. Exports is Our Specialty! and we can source many hard to replace grades and or non-standards sizes to meet the special requirements of our customers. All ASTM Super Duplex Steel Plate UNS S32750 can be cut to size with the help of our extensive expertise in processing steel Plate products.


Our stock of Super Duplex Stainless Steel Sheet UNS S32760 includes thickness of 6mm up to 80mm with width of 1250mm, 1500mm, 2000mm.


  • Order Large or Small Quantity of ASTM A240 UNS S32750 Super Duplex Stainless Steel Plate
  • Cut to Size ASTM A240 UNS S32760 Stainless Steel Plate Available
  • No Minimum Order Quantity for 2507 Super Duplex Stainless Steel Plate Order
  •  

    Super Duplex Stainless Steel Plate, Super Duplex Stainless Steel Sheet, Duplex Stainless Steel Coil, Super Duplex Plates, UNS S32750, 2507, ASTM A240 UNS S32760

    Duplex Stainless Steel Plate Range

    Super Duplex Stainless Steel Plate Specification ASTM A240 / ASME SA240
    Super Duplex Stainless Steel Manufacturing Process Hot Rolled (HR) / Cold Rolled (CR)
    Super Duplex Stainless Steel Plate Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc.
    UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904, UNS S32750, UNS S32760
    EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539
    Super Duplex Stainless Steel Plate Thickness 0.6 MM TO 80 MM THICKNESS
    Super Duplex Stainless Steel Plate Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement
    Super Duplex Stainless Steel Plate Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement
    Super Duplex Stainless Steel Plate Surface Finish 2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available.
    Super Duplex Stainless Steel Plate Coating PVC coating Normal / Laser, Film: 100 micrometer, Color: black/white.
    Super Duplex Stainless Steel Plate Other Testing NACE MR0175, Ultrasoung TEST, IGC TEST, Intergranular Corrrosion Test as per ASTM A262 Practice E, Charpy Impact Test, Macro, Grain Size, Hardness, etc.
    Super Duplex Stainless Steel Plate Value Added Services Gas Cutting / CNC Plasma Cutting / Profiling / Rolling / Bending / Sheet Metal Fabrication / Drill / Punch / Machining / Sand Blasting / Shot Blasting / Heat Treatment
    Super Duplex Stainless Steel Plate Packaging Loose / Carrate / Wooden Pallet / Wooden Box / Plastic Cloth Wraps
    Super Duplex Stainless Steel Plate Shipment & Transportation By Road - Truck / Train Partial Load, Full Load, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
    Super Duplex Stainless Steel Plate Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS, Bureau of Indian Standards BIS Approved ETC

    Super Duplex Stainless Steel Plate Chemical Compostion and Properties

    The chemical composition of grade Super Duplex Stainless Steel is outlined in the following table

    Trade Name

    UNS

    Super Duplex Industry Specifications

    Chemical Composition

    SAF 2507®

    UNS S32750

    ASTM A182 F53, A240, A276, A479, A789, A790, A815, A928, A988
    SAE J405

    C 0.030 max 
    Cr
     24.0-26.0
    Cu 0.5 max
    Mn 1.20 max
    Mo 3.0-5.0
    N 0.24-0.32
    Ni 6.0-8.0
    P 0.035 max
    S 0.020 max
    Si 0.8 max

    UNS S32760

    ASTM A182 F55, A240, A276, A314, A473, A479, A789, A790, A815, A928, A988
    SAE J405

    C 0.03 max 
    Cr
     24.0-26.0
    Cu 0.5-1.0
    Mn 1.0 max
    Mo 3.0-4.0
    N 0.2-0.3
    Ni 6.0-8.0
    P 0.03 max
    S 0.01 max
    Si 1.0 max
    W 0.5-1.0

    Super Duplex Stainless Steel Plate Mechanical and Physical Properties

    The mechanical properties of grade Super Duplex Stainless Steel Plates are displayed in the following table.

    Trade Name

    UNS

    Min.Tensile
    (KSI)

    Min.Yield
    (KSI)

    Elongation
    %

    SAF 2507®

    UNS S32750

    116

    80

    15

    UNS S32760

     109

    80

    25


    Super Duplex Stainless Steel Plate Price

    Super Duplex Stainless Steel Plate Manufacturer Name and Origin

    Super Duplex Stainless Steel Plate is in Ready Stock and Ready to Deliver. High Quality, Lower Cost But Best Service in Duplex Steel Plates, Sheet, Coils

    Super Duplex Stainless Steel Plate Application

    • Automotive
    • Railway & Transport
    • Architecture, Building & Construction
    • Chemical & Petrochemical Industries
    • Pharmaceutical
    • Energy and Power
    • Oil and Gas Industries
    • Kitchenware and Food Processing Industries
    • Plumbing And Overhead Water Tanks

    Super Duplex Stainless Steel Plate Available Offer and Discounts

    Buy Now Super Duplex Stainless Steel Plate at an Attactive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

    Super Duplex Stainless Steel Plate Available Thickness, Width and Length










    Super Duplex Stainless Steel Plate Packing Shipment

    Super Duplex Stainless Steel Plates is Covered with Plastic Cloth and Packed in Wooden Box, Wooden Pallet and Wooden Fumigated Carrate. Our Packaging is Fully Waterproof and Safe for Transport with Proper Strips on Wooden Box, having Lifting Point.

    Super Duplex Stainless Steel Plates Exported Countries

    We Export Super Duplex Stainless Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

    Super Duplex Stainless Steel Plates Supplying in States and Cities

    We Supply Super Duplex Stainless Steel Plates Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Mumbai, Navi Mumbai, Pune, Nashik, Nagpur, Solapur, Kolhapur, Ambernath, Ahmednagar, Latur, Ahmadabad, Surat, Rajkot, Vadodara, Panaji, Madgaon, Chennai, Kolkata, Hyderabad, Bengaluru, Delhi, New Delhi, Ludhiana, Chandigarh, Raipur, Bhopal, Jamshedpur, Vishakhapatnam, Cochin, Ghaziabad, Noida, Gurugram, Bhillai, Durgapur, Vijaywada, Kanpur etc.


    Vimek Industries, is a well known worldwide Exporter of Super Duplex Stainless Steel Plates, Vimek Industries, is committed to provide each and every customer with the highest standard of customer service. We deals in Super Duplex Stainless Steel Plate in India and Overseas, offering a wide range of Super Duplex Stainless Steel Plate UNS S32750, UNS S32760


    Super Duplex Stainless Steel Plates, SS Duplex Plate, ASTM A240 UNS S32750 / UNS S32760 / 2507
    Jindal, Outokompu, Aperam, Columbus, BRG, Acroni, Acerinox, TISCO
    Most Relevant and Trusted Supplier of Super Duplex Stainless Steel Plates Worldwide Based in Mumbai, India. ASTM A240 UNS S32750, UNS S32760 Duplex Stainless Steel Plate

    Supplying Countries & Cities

    UAE, Bahrain, Italy, Indonesia, Malaysia, USA, Singapore, Philippines, Mexico, China, Brazil, Peru, Nigeria, Kuwait, Jordan, Oman, Muscat, Dubai, Thailand, Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia, Algeria, Angola, Congo, Kenya, Sudan, Poland

    Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Indore, Thane, Bhopal, Vadodra, Nashik, Faridabad, Rajkot, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Kochi, Bhavnagar, Siliguri, Visakhapatnam

    Vimek Industries

    4th Floor, Platina, G Block,
    Bandra Kurla Complex,
    Mumbai - 400051. Maharashtra. INDIA


    Tel:


    Email: sales@vimekindustries.com

    Web: www.vimekindustries.com


    ISO 9001
    ISO 14001
    OHSAS 18001
    PED-97/23/EC